MED 1827A

Single-Coated Film

MED 1827A is a single-coated, soft, pliable, transparent polyurethane film with an acrylic adhesive. This product’s conformable film offers a high degree of user comfort, while its transparency allows for wound or site visibility; in some applications, it can act as a barrier to assist in decreasing the risk of bacterial infections. The adhesive is protected by a one-side siliconized glassine paper liner.


Typical Application

Designed for incise applications, wound care, IV securement and situations requiring good MVTR and sustained periods of wear. 


Features and Benefits
  • Thin and conformable
  • Breathable
  • Moisture resistant
  • Transparent
  • Printable
  • Available with and without handling bars
  • Gamma and EtO sterilizable

  Product Construction Typical Values*   Description
  Support Thickness 1.8 mils
45 µm
  Transparent polyethylene film
  Carrier Thickness 1.0 mils 25 μm
  Transparent polyurethane film
  Adhesive Thickness 2.6 mils 65 μm
  Acrylic adhesive designed for medical applications
  Release Liner Thickness
2.6 mils 65 µm
  White glassine paper

 

  Physical Properties (Not intended as a specification.) Test Method** Typical Values*
  Peel Adhesion on Polyethylene (PE) 
TDS-01 0.8 lbf/in
3.5 N/25 mm
  Peel Adhesion on Stainless Steel (SS)
TDS-03
2.3 lbf/in
10.0 N/25 mm 
  Liner Release  TDS-06 1.6 oz/in
45 g/25 mm
  Finat Tack
TDS-07 9.1 lbf/in
40 N/25 mm
  Dynamic Shear TDS-10 16 lbf/in
70 N/25 mm
  MVTR
TDS-16
26 g/100 in2 per 24 hr
400 g/m2 per 24 hr
  Elongation Machine Direction TDS-15 350%
  Elongation Cross Direction TDS-15 350%
  Load at Break Machine Direction TDS-15 6.3 lbf/in
28 N/25mm
  Load at Break Cross Direction TDS-15 8.0 lbf/in
35 N/25mm

MVTR, moisture vapor transmission rate.
*Refer to product specifications for material acceptance limits.
**Test method information available upon request.

 

 

STORAGE AND SHELF LIFE

Two years when stored at 23°C (73°F), 50% relative humidity, out of direct sunlight, in original packaging.

 

TERMS AND CONDITIONS