Contact us

Go
 

MED 5597H

Single-Coated Film Hydrocolloid

MED 5597H is a single-coated, transparent polyurethane film with an advanced and highly integrated hydrocolloid formulation. This product's absorbent adhesive is designed to not break down upon saturation, to provide for a low profile, to assist in creating optimal skin and wound healing conditions, and has a high fluid handling capacity.

Typical Application

Designed for wound care and fixation of medical devices.

Features and Benefits
  • Conformable
  • Integrated
  • High absorption rate
  • Moisture resistant
  • Die-cuttable
  • Gamma sterilizable
  Product ConstructionTypical Values*  Description
  Carrier Thickness2.8 mils70 μm
  Transparent polyurethane film
  Adhesive Thickness16 mils
400 µm
  Hydrocolloid designed for medical applications
  Release Liner Thickness3.3 mils
85 µm
  White super-calendered glassine

 

  Physical Properties (Not intended as a specification.)Test Method**Typical Values*
  Peel Adhesion on Stainless Steel (SS)
TDS-04
1.1 lbf/in 
5.0 N/25 mm
  Liner ReleaseTDS-061.5 oz/in
43 g/25 mm
  Static ShearTDS-14700 min
  Reverse TackTDS-09
3.6 lbf/in
18 N/25 mm
  Static AbsorptionTDS-17240 [g/100in2 -24 hours]
3700 [g/m2 -24 hours]


*Refer to product specifications for material acceptance limits. **Test method information available upon request.

 

STORAGE AND SHELF LIFE

Two years when stored at 23°C (73°F), 50% relative humidity, out of direct sunlight, in original packaging.

 

TERMS AND CONDITIONS