Contact us

Go
 

MED 5725P

Single-Coated Nonwoven

MED 5725P is a single-coated, white, embossed, soft polyethylene nonwoven with a porous acrylic adhesive. This product's unique construction creates a high MVTR, allowing air and moisture to pass freely through the breathable adhesive and nonwoven carrier, which can support extended wear and reduce the likelihood of skin maceration in some applications.

Typical Application

Designed for ostomy applications.

Features and Benefits
  • Conformable
  • Highly breathable
  • Extended wear time
  • Heat sealable
  • Die-cuttable
  • Gamma and EtO sterilizable
  Product Construction    Typical Values*   Description
  Carrier Thickness 23.6 mils
 600 µm
   White, embossed LDPE nonwoven
  Adhesive Thickness   2.0 mils
 50 µm
   Porous acrylic adhesive designed for medical applications
  Liner Thickness
   3.1 mils
 80 µm
   White single-coated kraft

 

  Physical Properties (Not intended as a specification.) Test Method** Typical Values*
  Peel Adhesion on Polyethylene (PE) 
 TDS-01 0.8 lbf/in
 3.5 N/25 mm
  Peel Adhesion on Stainless Steel (SS)
 TDS-05
 1.0 lbf/in
 4.4 N/25 mm
  Liner Release 
 TDS-06
 1.8 oz/in
 50 g/25 mm
  Finat Tack
 TDS-07
 2.2 lbf/in
 10 N/25 mm
  Static Shear
 TDS-12
 20 minutes
  MVTR
 TDS-16
 120 g/100 in2 per 24 hr
 1800 g/m2 per 24 hr

MVTR, moisture vapor transmission rate.
*Refer to product specifications for material acceptance limits.
**Test method information available upon request.

 

STORAGE AND SHELF LIFE

Two years when stored at 23°C (73°F), 50% relative humidity, out of direct sunlight, in original packaging.

 

TERMS AND CONDITIONS