MED 6001SI

Double-Coated, Trilaminate TPU Film with a High Tack Soft Silicone Adhesive

MED 6001SI is a double-coated, transparent thermoplastic polyurethane (TPU) film with a high tack soft silicone adhesive (SSA) for adhering to the skin, with an acrylic adhesive suitable for a wide variety of materials. The softness, conformability and repositionability of the  silicone adhesive offer a high degree of user comfort. The fully-coated silicone adhesive side of the roll is equipped with a polypropylene (PP) release liner, compatible for die cutting. The acrylic adhesive contains a white paper liner, which is printable on one side.

Typical Application

Designed for conversion as the silicone adhesive layer for multi-layered advanced wound care dressings. Application areas also include patient monitoring and wearables.

Features and Benefits
  • Greatly increases skin adhesion while remaining gentle and soft
  • Repositionable with minimal pain upon removal
  • Acrylic adhesive, suitable for a wide variety of materials
  • PP release liner, suitable for die cutting or kiss cutting
  • Non-irritating, non-sensitizing, skin-friendly
  • Atraumatic removal with minimal epidermal stripping
  • Secure fixation
  • Transparent
  • Conformable and flexible
  • EtO sterilizable

  Product Construction Typical Values*   Description
  Silicone LIner Thickness 3.5 mils
90 μm
  Transparent polypropylene liner
  Silicone Adhesive Coat Weight
3.8 mils
100 gsm
 Soft silicone adhesive designed for medical applications
  Carrier Thickness
1.6 mils
40 μm   Transparent polyether polyurethane film
  Acrylic Adhesive Coat Weight
1.6 mils
40 μm   Acrylic adhesive designed for medical applications
  Acrylic Liner Thickness 3.5 mils
90 μm   White super-calendered glassine paper


  Physical Properties (Not intended as a specification.) Test Method** Typical Values*
  Silicone Adhesive Coat Weight
100 gsm
  Silicone Peel Adhesion (Polycarbonate Plate)
1.51 N/25 mm
  Silicone Liner Release (PP Liner) TM020 0.19 N/25mm
  Acrylic Adhesion TM021
10.85 N/25 mm
  Acrylic Liner Release (Paper Liner) TM020
0.05 N/25 mm
  MVTR TM046
380 g/m² per 24 hr
  Thickness TM022
0.34 mm

MVTR, moisture vapor transmission rate.
*Refer to product specifications for material acceptance limits.
**Test method information available upon request.




Two years when stored at 23°C (73°F), 50% relative humidity, out of direct sunlight, in original packaging.